Change language
Contact us: +49 9321 2680 -201

» THERE ARE TWO WAYS TO PROTECT YOUR PLANT AGAINST PID
BUT JUST ONE REASONABLE «

» PREVENTS DURING DAYTIME, RECOVERS DURING NIGHTTIME «

DAY MODE (Float Controller CI)

The Float Controller CI also offers the possibility of daytime operation. By increasing the positive potential to max. 960V, the modules have no negative potential relative to earth during operation and are therefore in a permanently safe condition Due to that PID and TCO can be prevented from happening.
Especially for constuction of new PV plants this functionality offers big advantages, exceptionally by using thin film modules.

night MODE (Float Controller CI & SI)

As soon as the generator voltage drops below a defined threshold value in the evening, the Float Controller increases the PV field to a high, positive potential thus reversing the polarisation effect that arises during operation.
When the generator voltage rises again over a defined threshold value in the morning, the Float Controller automatically switches to standby mode. Both the threshold values and the maximum output voltage can be individually adapted.

» PADCON Float Controller OPERATES IN PARALLEL «

PARALLEL OPERATION

  • Easy and fast installation
  • Approved by many inverter manufacturer
  • Day & night mode possible

» PADCON PID SOLUTION PROTECTS ALL MODULE TYPES «

Float Controller CI

MODULE PROTECTION TO FIGHT THE PID-EFFECT AND TCO-CORROSION

The Float Controller CI is designed for larger PV plants with system voltages from 1000V to 1500V and is the perfect solution for central or string inverters.

  • Ideal for central or string inverters
  • Connection of up to 20 MPPTs per device thanks to Multi Connector
  • Day or night mode selectable

Float Controller SI

MODULE PROTECTION TO FIGHT THE PID-EFFECT

PV plants with string inverters or small central inverters can easily be protected by Float Controller SI. This device handles up to 110kWp and is operating only during inverter inactivity.

  • Especially designed for string inverters
  • Connection of up to 3 MPPTs per device
  • Ideal for small rooftop plants

» RECOVER EXISTING PLANTs, PROTECT NEW PLANTS FROM
THE VERY BEGINNING «